> ## Content Index
> Fetch the complete content index at: https://www.plasticsiq.com/llms.txt
> Use this file to discover other available public pages before exploring further.

# GÜNTHER Hotrunner Technology introduces two new nozzles at Fakuma 2024
- URL: https://www.plasticsiq.com/g-c3-bcnther-heisskanaltechnik-introduces-two-new-nozzles-at-fakuma-2024/
- Published: 2024-10-04T08:48:31.000Z
- Updated: 2026-09-21T18:58:30.000Z
- Description: With Fakuma 2024 around the corner, GÜNTHER Hotrunner Technology prepares to introduce two new nozzles: PRISMA and a redesigned OktaFlow. They are reliable, cost-effective and high-performing, adapting well to all applications.
- Author: Giulia Daniele
- Tags: Injection Moulding, Machinery

**GÜNTHER Hotrunner Technology introduces two new nozzles at Fakuma 2024: PRISMA and an extension of the already established OktaFlow range.** 

Günther Heisskanaltechnik

---

When using valve gate hot runner systems, users often incur the same issue: they're restricted when gating parts with small pitch centres. This may be the case when a round part requires tight concentricity tolerances and three gates.

GÜNTHER**'**s PRISMA nozzles to be showcased at Fakuma 2024 use special internal melt guidance channels. They have three valve gates on a small PCD and perform well with technical polymers in high-volume moulds. 

The company's second nozzle to be exhibited is an extension of its OktaFlow series. Compact, reliable and cost-effective, it has two tips and uses a smaller sub-manifold to reduce energy consumption. 

GÜNTHER different nozzle types to cater for various applications. Users can replace the individual tips, and because the sub-manifold is not fixed to any bearings, the nozzle is not impacted by heat expansion.